Mummy / Zombie statuette mold
The living dead as reimagined by artist Scott Conner owner of Evil Grin studios.
These molds can be used for casting urethane and epoxy resin, wax, cement, etc.
The molds will be made of high-quality tin cure silicone rubber with a 30 durometer. The silicone for each mold is evacuated of any air bubbles prior to pouring.
This mold comes with a jeweler's cut seamline.
The use of a mold release will extend the life of the mold.
Small holes in the bottom of mold are vent holes to help avoid trapped air pockets
Approx 4.5" tall